PowerOptimal Elon® 100 Quick Reference User Guide v2.08
 
Solar PV Water Heater Quick Reference Guide
| Dial Setting
| Time on Mains*
| Time on Solar*
| 24-Hour Clock
|
| MAINS ONLY
| 24 hr
| Never
| 
|
Dial
Lights
| 1
| 12:00
to
08:00
| 08:00
to
12:00
| 
|
| 2
| 14:30
to
05:30
| 05:30
to
14:30
| 
|
| 3
| 17:00
to
03:00
| 03:00
to
17:00
| 
|
* Times are approximate – will vary slightly with season and location
| SOLAR ONLY
| Never
| 24 hr
| 
|
< Attach Elon Serial Number
Label
Here >
Mains
& Solar Indicator Lights
Note 1: Initial switch-on wait time for solar is 1 min and for mains is 5 min.
Note 2: Turning dial into “Mains Only” and back out will start mains heating cycle until geyser is on temp.
| Lights
| Meaning
|
⏺⏺
| Green light ON
| Geyser on temperature
|
 ⏺⏺
| Green light flashing
| Heating with solar
|
⏺⏺
| Red light ON
| Mains power available (power to Elon® unit on)
|
 ⏺⏺
| Red light flashing
| Heating with mains
|
⏺⏺
| Both lights ON
| Geyser is on temperature. Mains power available (mains power to Elon® unit on)
|
 ⏺⏺
| Red light ON & Green light flashing
| Heating with solar. Mains power available (mains power to Elon® unit on)
|
  ⏺⏺
| Red & Green light flashing fast
| Isolation fault (contact electrician)
|
⏺⏺
| Both lights OFF
| No power to unit (for example: no sun plus a power failure, or no sun plus geyser breaker at DB board is switched off) OR supply voltage outside specifications
|
www.poweroptimal.com/elon100
Online user instruction video: www.poweroptimal.com/elon100
Full user manual: www.poweroptimal.com/manuals
Full
user manual:
V 2.08
2021/04/26
